• FG-8110 ảnh 1

Máy phát xung Uni FG-8110 (10Mhz)

THÔNG SỐ SẢN PHẨM: Máy phát xung Uni FG-8110 (10Mhz)

Hãng sản xuất: UNI-Hàn Quốc
Xuất xứ: Hàn quốc
Giải tần: 10MHz
Kiểu sóng ra:Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square, DC
Điện áp ra: 20Vp-p
Đếm tần: 200mHz đến 110MHz
Hiển thị: 7 led, Overflow, Gate time, MHz, kHz, Hz, mHz,
Nguồn: 115 or /230 VAC ± 10%, 48 to 66Hz
Kích thước và trọng lượng: 240(W) X 270(D) X 90(H)mm;3kg
Phụ kiện: Dây nguồn, cáp BNC, cầu chì, HDSD
Bảo hành: 12 tháng

Thẻ:Uni FG-8110 Sweep Function Generator (10Mhz)
-4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
-Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
-0.1 Hz to 10 MHz Frequency Out put in 7 Ranges
-Built in 7digits External Counter Display measuring up to 110MHz
-Internal and External linear Sweep control from 1:1 to 100:1
-Variable Symmetry for generating Sawtooth and Pulse waveforms
-TTL leveled Square waveform output
-Variable DC Offset control
-Variable Output level control with 20 dB Attenuator and Amplitude control
Function Specification
WaveformsSine, Square, Triangle, Ramp, Pulse, Sawtooth,
TTL Leveled Square, DC
Frequency Range0.1Hz to 10MHz in 7 Range (1,10,100,1K,10K,100K,1M)
Frequency Accuracy± 5% of full scale
Output Level20Vp-p in open circuit, 10Vp-p into 50Ω Load
DC Offset ControlMore than +/-5V (into 50ohm)
Output Impedance50Ω±5%
Attenuator-20dB fixed and continuously variable
Sine waveFlatness : ±0.3dB to 10MHz
Distortion : Less than 1% at 0.1Hz to 100KHz
Square waveRise and Fall time : Less than 25nSec
Triangle waveLinearity : More than 99% at 0.1Hz to 100 kHz
TTL OutputRise and Fall time : Less than 25nSec
Output Level :TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V)
Symmetry Variation1 :1 to 10 : 1
Sweep Function
WidthVariable from 1 :1 to 100 : 1
Rate0.5Hz to 50Hz(20mSec to 2Sec)
External VCF InputInput Voltage 0 to 10V
Input Impedance : Approx. 10 kohm
Frequency Counter
Display7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz,
Frequency Range200mHz to 110MHz with Auto Range
Accuracy+/- Timebase Error+/- 1Count
Low pass Filter-3dB, 100kHz
Input Sensitivity100mVrms
Time base10MHz Crystal, 20ppm
Max. Input Voltage250Vpp
GeneralPower Requirement115 or /230 VAC ± 10%, 48 to 66Hz
Operating Temperature0 to 50℃ (Accuracy specified at 25 ± 5℃)
Dimension240(W) X 270(D) X 90(H)mm
WeightApprox. 3 kg
Standard AccessoriesPower Cord, BNC Cable, Fuse, Instruction Manual