Tải điện tử DC BK Precision 8512 (600W, 500V, 30A)

Mã sản phẩm: 8512

64,272,500 VNĐ


- Wechat, Zalo, Viber: 0937819999
- Wechat, Zalo, Viber: 0906066620


Bảo hành:12 thángVận chuyển miễn phí nội thành Hà Nội


Hãng sản xuất : BK PRECISION
Model : 8512
Xuất xứ: Trung Quốc
Bảo hành : 12 tháng


Điện áp vào: 0 – 500 V
Dòng điện vào: 0 – 30 A
Công suất vào: 600 W
Chế độ hoạt động: CV, CC, CR, CW
Đo lường: A, V, W
Bảo vệ: quá dòng, quá áp, quá công suất, quá nhiệt
Nguồn: 110 / 220VAC
Kích thước: 429 mm x 88 mm x 355 mm
Trọng lượng: 14 kg
Phụ kiện: dây nguồn, HDSD, CD phần mềm, cáp RS232 to TTL IT-E131, Cáp cUSB to TTL IT-E132

(Ghi chú: Chọn Model 8512 EXD để có nguồn vào 220VAC)

datasheet

manual

The 8500 series Programmable DC Electronic Loads can be used for testing and evaluating a variety of DC power sources. Their wide operating ranges of up to 500 V and 240 A, flexible operating modes and excellent measurement accuracy make the 8500 series well suited for characterizing DC Power supplies, DC-DC Converters, batteries, fuel cells and solar cells.

The loads can operate in CC, CV, CR or CP mode while voltage/current or resistance/power values are measured and displayed in real time. Load terminals are isolated and floating. Over temperature, over power, over voltage, over current and reverse polarity protection will help protect your valuable prototype and circuits.

  • Constant current (CC), resistance (CR), voltage (CV) and power (CP) operation
  • 8500 Series contains models with wide voltage and current range, 0 to 500 V, 0 to 240 A (5000 W max)
  • Built-in transient generator
  • Short circuit test
  • Built-in high resolution (0.1 mA/1 mV) voltage and current measurement (models 8500 & 8502)
  • Over-Current/Over-Voltage/Over-Power/Over-Temperature Protection
  • USB to TTL serial converter cables and application software included
  • List mode operation for increased throughput
  • Battery testing mode to provide A*hr rating of battery (ending voltage level is adjustable)
  • Flexible triggering: Create trigger events by front panel keystroke, back panel TTL signal, or software.
  • Remote voltage sensing to compensate for the effect of voltage drop in wires